Last Updated: Wednesday, 01 May 2019 16:01
Laboratory staff member looking through microscope

In order to be certain results we obtain from microbiological/bacteriological testing of a water sample are truly representative of that sample, it is important we take all possible care to avoid contamination of the sample by the bacteria that are all around us – on our skin, in the soil, on the surfaces we touch and sometimes even in the air.

You can help minimise the risk of contamination of your water sample by following the procedures shown below and keeping the following principles in mind:


Procedure for collecting samples from a tap

  1. Run the tap for 2 – 3 minutes (or as long as necessary to flush out the line) before collecting the sample.
  2. If possible, disinfect the tap by either:
  1. Fill the sample container, at a constant flow, taking care to avoid splashing or sample aeration. Fill container to the base of the container neck. Do not overflow the bottle.


Procedure for collecting samples where no tap is available

  1. Hold the bottle near its base and plunge it, neck downward, below the surface.
  2. Turn the bottle until the neck points slightly upward and the mouth is directed towards the current. If there is no current, create a current artificially by pushing the bottle forward horizontally in a direction away from the hand.

(NOTE: When sampling from a boat, pontoon etc., samples should be obtained from the upstream side).


Storage and transportation of samples

If samples cannot be delivered to the laboratory within 1 hour of collection, they should be transported to the laboratory in an iced cooler. Ideally samples should be held at 4° (plus or minus 2oC). Samples should not be frozen. Ideally, samples should be delivered to the laboratory within six hours of collection but 24 hours is acceptable, provided the sample has been stored at the appropriate temperature.

Please note that in order to ensure reliable results we need to receive samples for Microbiological testing Monday to Thursday. Samples can not be submitted on Fridays.